Skip to main content

Drawing and editing

Everything you draw in KizamuBeam is an editable vector shape. This page covers the drawing tools, selecting and transforming, and node editing. Combining and reshaping paths is described in Paths and shapes, exact placement in Snapping, guides and measuring.

Drawing tools​

The drawing tools are on the tools toolbar on the left and in the Tools menu.

ToolShortcutHow to use it
Lines and curvesCtrl+LClick to set corners; click and drag to make a Bézier curve. Clicking the start point closes the shape; double-click, Enter or right-click finishes.
ArcSet the center, then radius and start angle, then end angle — or click start, through point and end (3-point). Shift snaps angles to 15°, Enter commits, Esc discards the arc. Mode and direction are in the tool options; in center mode the direction picks the complementary arc, in 3-point mode it reverses the node order, so the cut starts at the last point.
Curved pathClick to place a corner, drag to shape a smooth curve. Anchors and handles stay visible while you draw. Clicking near the open end of an existing open path continues that path. Click the start anchor to close the shape, double-click or Enter finishes, Backspace removes the last anchor, Esc discards.
Freehand / PencilDrag a stroke; it is fitted to smooth, editable curves when you release the mouse. Tool options set the tolerance and whether the stroke is closed.
ShaperDrag a gesture: encircling shapes unites them, a line crossing one shape subtracts along the stroke, a closed gesture creates a recognized basic shape (rectangle, rounded rectangle, ellipse, polygon) when recognition is on — otherwise the stroke is fitted like the Pencil. Options: close distance (the ring at the start point shows whether the contour closes on release), smoothing, total cut width and the list of shape suggestions incl. Freehand. The last operation stays adjustable until the next gesture, a tool change or Undo; while it is, the points of the recognized curve can be dragged like a spline.
RectangleCtrl+RDrag a rectangle. Shift draws a square, Ctrl draws from the centre. Corner radius in the numeric edits toolbar; the button next to it sets a separate radius for each corner (or all corners linked).
EllipseCtrl+EDrag an ellipse. Shift draws a circle, Ctrl draws from the centre.
PolygonDrag from the centre. Number of corners and Star in the numeric edits toolbar.
TextCtrl+TSee Text and codes.

Lines, Pencil, Curved path and Arc share one button group on the tools toolbar. After drawing, KizamuBeam switches back to the selection tool; to keep drawing with the same tool, switch off Switch to selection after drawing under Edit → Settings → Mouse and keyboard. Remember tool switches in the same place keeps the options of each tool for the next start.

Rectangles, ellipses, polygons and text stay editable as such: the corner radius, the number of corners or the text can be changed later. Convert to Path (Ctrl+Shift+C) turns them into ordinary paths.

Selecting​

  • Click selects an object, Shift+click adds or removes one.
  • Marquee to the right selects objects that lie completely inside, marquee to the left also those it only crosses.
  • Lasso selection (Tools → Path, or the button group with the selection arrow): draw around objects to select those you enclose completely. Drawing counter-clockwise switches to touch mode, where every object the lasso crosses is selected too; you can change direction while drawing. Shift adds, Ctrl toggles, Shift+Ctrl removes, Esc cancels.
  • Ctrl+A selects everything on the current page; Esc clears the selection.
  • A right-click opens a context menu with the commands that fit what is under the pointer: shapes, images, nodes or empty canvas.

When many objects lie on top of each other, Tools → Isolate selection helps: only the selected objects can be clicked and snapped to, everything else stays visible but out of reach. A badge at the top shows that isolation is active. Isolation does not affect the job; everything is still lasered. Leave it with Leave isolation or Esc.

Moving, scaling and rotating​

  • Drag a selection to move it. Arrow keys move it by 1 mm (Shift 10 mm, Alt 0.1 mm); the three step sizes can be changed under Edit → Settings → Mouse and keyboard.
  • Drag a handle to scale. Shift switches between proportional and free scaling, Ctrl scales from the centre.
  • Click the selection a second time (or drag just outside a corner) to rotate. The pivot can be moved. Shift snaps to 15°, Ctrl to 5°, Esc cancels.
  • . and , rotate by 90°. Ctrl+Shift+H and Ctrl+Shift+V mirror.

Exact values​

The numeric edits toolbar at the top shows position, size and rotation of the selection. A 9-point anchor sets which point the values refer to. The fields accept formulas and units, for example 100/3, 2in or 25.4*3, and project parameters such as {Width}/2 (see Templates and library). A comma works as the decimal separator as well as a point, everywhere in the app, and numbers are shown in the format of the app language.

Grouping, aligning and arranging​

  • Ctrl+G groups, Ctrl+U ungroups.
  • With several objects selected, L R T B align left, right, top and bottom, C and E align centres. The alignment button group in the main toolbar also distributes objects evenly.
  • Arrange → Stacking order brings objects to the front or sends them to the back.
  • Arrays, nesting and pattern fills are described in Arranging and repeating.

Editing nodes​

Choose Edit nodes (Ctrl+`) to change the shape of paths. With several paths or shapes selected, the nodes of all of them can be edited together.

ActionHow
Select nodesClick, Shift+click, marquee (or Node lasso in the node toolbar, which selects with a freehand outline; with Alt it can also start on top of a node) or Ctrl+A
Move nodesDrag them, or nudge with the arrow keys
Delete nodeD or Delete
Insert nodeI, or double-click a segment
Segment as line / curveL / C
Node as corner / smoothE / S
Break the path at the nodeB
Trim the edge back to the intersectionsT

Deleting a segment splits the path there. Every operation is one undo step.

Undo and history​

Ctrl+Z undoes, Ctrl+Y (or Ctrl+Shift+Z) redoes. The History window (next to Objects) lists the last 200 changes by name, such as “Move” or “Offset”; click a row to jump several steps back or forward at once.