Finger-jointed boxes
Find both box generators in Toolbox → Boxes and Furniture. For a lid that opens on a pin, add a lid hinge afterwards.
Finger Joint Box
| Field | Meaning |
|---|---|
| Dimensions | Outside dimensions or Inside dimensions: whether width, depth and height are measured outside or inside the walls. |
| Width, Depth, Height | Size of the box in mm. |
| Material thickness | Thickness of the board. Measure it; boards are rarely exactly as thick as sold. |
| Up | Open, or Closed (lid with fingers). |
| Finger width | Minimum finger width. Every edge gets an odd number of equally wide fingers. |
| Total fit clearance | Total play of the finger joints: each gap is this much wider than its finger, half on each side; negative = press fit. |
| Kerf | Width of the laser cut; outlines are offset outward by half of it. |
The front and back walls own the corners. The parts are separate objects in a compact arrangement: identical parts stay together. A double-click on any part edits the whole box, on every page. Parts still in their generated layout move apart when they grow; parts you arranged yourself stay where they are.
Engraving on a panel
Put text or images on a panel and group them with it, or simply place them on top: in the 3D view, engravings show on the panel they lie on. The labelled box template (File → New from template …) is a ready example with a label on the front.
Getting a good fit
- Measure the material thickness with a caliper at several spots and enter the average.
- Start with a fit clearance of 0 and the kerf of your laser (0.1 to 0.2 mm for a diode laser on plywood).
- Cut the box. If it is too tight, increase the clearance in steps of 0.1 mm; if it is loose, decrease it.
The fit calibration finds these values for a material in one test, and new boxes then take them automatically.
Finger Joint Box with Dividers
An open or closed box with dividers that cross each other.
| Field | Meaning |
|---|---|
| Width, Depth, Height, Material thickness, Up | As for the box. |
| Compartments across width / Compartments across depth | Number of compartments in each direction. |
| Width distribution / Depth distribution | Clear compartment sizes as ratios or in mm, separated by colons. 1:2:1 makes the middle compartment twice as wide; 36mm:1 makes the first one 36 mm and the second takes the rest. + - * / and parentheses work too. Empty = equal compartments. |
| Divider drop below box top | How much lower the dividers are than the walls. |
| Kerf | Width of the laser cut. |
Finger width and Total fit clearance are under Advanced. Pieces and their holes share one layer.